• 新闻动态news
• 摆线针轮减速机速比怎样计算，你知道吗？

摆线针轮减速机速比怎样计算？
How to calculate the speed ratio of the cycloid gear reducer?
速度比=电机输出转速/减速机输出转速（“速度比”或“传动比”）
Speed ratio = motor output speed / speed reducer output speed ("speed ratio" or "transmission ratio") 了解电机的功率，转速比和使用系数，并找出减速机的转矩如下：
Know the power, speed ratio and usage coefficient of the motor, and find out the torque of the reducer is as follows:
减速器扭矩=电机功率的9550倍
Torque of the reducer = 9550 times the power of the motor
了解扭矩和减速器的输出转速和使用系数，并找出减速器所需的电机功率如下：
Understand the torque and speed and usage coefficient of the reducer, and find the motor power required for the reducer as follows:
电机功率=转矩除以电机的功率输入转速
Motor power = torque divided by motor power input speed.
电机扭矩计算
Calculation of motor torque
电机的“扭矩”，单位
The "torque" of a motor, unit
公式为T等于P / n的9549倍。
The formula is 9549 times T equal to P / n.
是电机的额定（输出）功率单位是KW。
The unit of the rated (output) power of the motor is KW.
分母是额定速度n是每分钟转数（r / min）。
The denominator is the rated speed n, which is revolutions per minute (R / min).
和n可以直接从电机铭牌上找到。
And N can be found directly from the motor nameplate.
设定：电机额定功率为P（kw），转速为n1（r / min），减速机总传动比为I，传动效率为u。
Setting: the rated power of the motor is P (kw), the speed is N1 (R / min), the total transmission ratio of the reducer is I, and the transmission efficiency is u.
那么：输出转矩= 9550 * P * u * I / n1（N.m）
Then: output torque = 9550 * P * u * I / N1 (N.m)

[上一篇]:电机、减速箱的转配注意事项，你了解吗？  [下一篇]:全面介绍联轴器的把相关知识？ 